Computer Accessories
 
 
 
Signal Meter : K-SM-9000
 
 
Connect the coaxial cable to the S-Meter output of the transceiver. if the transceiver does not have that sort of output, the connection will have to be made internally.
If you wish to light the VU meter,connect 13.8 volts to the power supply cable.
When receiving a signal, the meter will point a level shown by the VU meter may be controlled.
   

 
Sensitivity
80uA at '9'
Input Impedance
10K ohm
Power Supply
'12 - 13.8V
Consumption
50mA
Presentation
Analogical